McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 379)

D-7
Time Synchronization Protocol
Configure as NTP
Client
Use the following procedure to configure the Time Synchronization
Protocol
as an NTP client:
1. Access the Time Synchronization Protocol dialog box in UCM by
double-clicking an Edge node in the Network Map.
The UltraNet Edge Expanded View screen appears.
2. Double-click the Time Server icon in the Logical View of the
UltraNet Edge Expanded View screen.
The Time Synchronization Protocol screen appears.
3. Select NTP Server and enter the NTP server address in the Server
Address field. The address set for the NTP server must be
accessible through the Maintenance Port.
4. Click OK.
Disable the Time
Synchronization
Protocol
Use the following procedure to turn off the Time Synchronization
Protocol completely.
1. Follow step and step in the procedure above.