McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 193)

8
Configuring FICON Extension 8-21
Configuring a 1x1 Ethernet Wide Area Network
1. In the main window of the UltraNet ConfigManager, right-click
on the FICON interface (the cloud icon for FICON10) in the
network map.
The Create Data Path menu is displayed.
2. Click the Create Data Paths selection. You should see “marching
ants” outlining the FICON interface.
3. Double-click on the destination FICON interface (the cloud icon
for FICON20) in the network map.
The Create Data Path Wizard - Introduction dialog box appears.
Right-click on the icon
Double click on the icon