McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 185)

8
Configuring FICON Extension 8-13
Configuring a 1x1 Ethernet Wide Area Network
This wizard helps you select and configure an interface for each
node, and configure the circuit.
5. Click Next>.
The IP Circuit Wizard Node10 Choose Interface dialog box
appears.
The drop-down menu displays the available IP interface
providers in the UltraNet Edge 3000 for Node10.
6. Click the drop-down arrow and select the appropriate IP
interface provider and then click Next>.
drop-down arrow