McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 42)

2
2-2 McDATA UltraNet Edge 3000 User Guide
UltraNet Edge 3000 Featurization
Table 2-2 Client Connectivity (Fibre Channel) Card Option Features
Component/Feature Description
Fibre Channel (FCBB) card 1 port Fibre Channel card that supports:
E_port
F_port
FICON ISL extension
FICON extension
Short wave or long wave SFP required.
Fibre Channel (FCXL2) card 1 port Fibre Channel card for FC/SCSI Tape
Pipelining functionality with N or NL_port connectivity.
Configuration requirements:
Each chassis must have at least one Client connectivity card, with a maximum of two.
Fibre Channel connectivity cards require an SFP. Requirements are as follows:
FCBB Fibre Channel card requires one SFP per card, either short wave (multi-mode) or
long wave (single-mode).
FCXL2 Fibre Channel card requires one SFP per card, short wave (multi-mode) only.
Table 2-3 Client Connectivity (Fibre Channel) SFP Option Features
Component/Feature Description
Short wave SFP for FCBB Short wave (multi-mode) SFP for the FCBB Fibre
Channel card.
Long wave SFP for FCBB Long wave (single-mode) SFP for the FCBB Fibre
Channel card.
Short wave SFP for FCXL2 Short wave (multi-mode) SFP for the FCXL2 Fibre
Channel card.
Configuration requirements:
One Client SFP option is required for each Client connectivity card.