McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 User Manual
Page 18
xviii
UltraNet™ Edge Storage Router 3000
Preface
Chapter 5, Configuring E_port Extension over an Ethernet
WAN,
provides the procedures for configuring E_port extenstion
over an Ethernet network on your UltraNet Edge 3000 using
McDATA’s UltraNet ConfigManager configuration tool.
Chapter 6, Configuring F_port over an Ethernet WAN,
provides
the procedures for configuring an Ethernet network in F_port
using McDATA’s UltraNet ConfigManager configuration tool.
Chapter 7, Configuring E_port Extension over an ATM/POS
WAN,
provides the procedures for configuring E_port extension
over an ATM network on your UltraNet Edge 3000 using
McDATA’s UltraNet ConfigManager configuration tool.
Chapter 8, Configuring FICON Extension over an Ethernet
WAN,
provides the procedures for configuring FICON extension
over an Ethernet WAN on your UltraNet Edge 3000 using
McDATA’s UltraNet ConfigManager configuration tool.
Chapter 9, Configuring Tape Device Extension over an Ethernet
WAN,
provides the procedures for configuring Tape Pipelining
(Device Extension) on your UltraNet Edge 3000 using McDATA’s
UltraNet ConfigManager configuration tool.
Chapter 10, FC/SCSI Tape Pipelining,
provides an overview on
Tape Pipelining (Device Extension) inlcuding buffering,
emulation, data protection and device error recovery. It also
discusses specific information relevant to the UltraNet Edge
3000’s implementation of Tape Pipelining.
Chapter 11, Customer Support and Software Maintenance,
provides information for supporting and maintaining the
UltraNet Edge 3000. It covers McDATA Customer Support,
SNMP support, the UltraNet WebView management program,
and how to upgrade to new software releases.
Chapter 12, Hardware Maintenance,
provides removal and
replacement procedures for the UltraNet Edge 3000 Field
Replaceable Units (FRU).
Chapter 13, Troubleshooting and Diagnostics,
provides basic
information for troubleshooting and diagnostics for the UltraNet
Edge 3000 product.
Appendix A, Site Preparation,
provides site preparation
requirements for the UltraNet Edge 3000.