McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 156)

7
7-18 McDATA UltraNet Edge 3000 User Guide
Configuring a 1x1 ATM Wide Area Network
11. Click on the drop-down arrow and select the appropriate ATM
interface provider for Node 20.
NOTE: Select ATM in I/O port 3 for the first circuit. If you are configuring a
2x2, select ATM in I/O port 4 for the second circuit.
12. Click Next>.
The ATM Circuit Wizard - Node20 - Configure PVC dialog box
appears.
This dialog box enables you to configure PVC parameters for
Node20.
drop-down arrow