McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 302)

12
12-24 McDATA UltraNet Edge 3000 User Guide
Replacing the Gigabit Ethernet Copper Transceiver
Installing the Gig-E
Copper Transceiver There is only one type of Copper transceiver used for the Gig-E
interface card, use the following procedure to install it into the
interface card.
1. Carefully position the copper transceiver to insert it into the
interface card.
2. Slide the transceiver into the interface card until it clicks into
place.
Sb135
Metal Clasp
Sb134