McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 334)

13
13-22 McDATA UltraNet Edge 3000 User Guide
UltraNet Edge 3000 Diagnostic Programs
***** PASSED--- DMA Incr Byte Test passed = 1,
failed = 0
DMA Incr Packet Test running...
***** PASSED--- DMA Incr Packet Test passed = 1,
failed = 0
DMA Incr Pkt/Byte Test running...
***** PASSED--- DMA Incr Pkt/Byte Test passed = 1,
failed = 0
DMA1/2 Test running...
***** PASSED--- DMA1/2 Test passed = 1,
failed = 0
DMA1/2 Incr Byte Test running...
***** PASSED--- DMA1/2 Incr Byte Test passed = 1,
failed = 0
DMA1/2 Incr Packet Test running...
***** PASSED--- DMA1/2 Incr Packet Test passed = 1,
failed = 0
DMA1/2 Incr Pkt/Byte Test running...
***** PASSED--- DMA1/2 Incr Pkt/Byte Test passed = 1,
failed = 0
Fibre Channel
Diagnostic Program
(FCBB) The UltraNet Edge 3000 Fibre Channel diagnostic program resides on
the UltraNet Edge 3000’s flash drive as the file fcbb.dll. Using the
PROM interface, the file must be loaded into memory and executed
from there.
This program tests the UltraNet Edge 3000’s Fibre Channel module
and verifies that it can perform memory transfer functions to the local
memory and the global memory. Test data can be looped back either
internally or externally.
Individual tests can be selected from the menu or the 99. All Tests
option can be used to run tests 3 through 22.
*> SBTM Fibrhannel BB Diagnostic Test Rev. 1.1 - May 04,
2003 <*
MAIN MENU
Options={ SINGLE STOP 0 1 } Total Errors={ 0 } Tests
Run={ }
Parameters={ 648 10000 00 0011 1 4 AAL5 Random
01020304 }
{ BUFFER_BLD COMPARE_DATA BUFFER_CLR ADD_CRC_TO_OB
}
{*FC-BB#0:B#1/D#1:PCI#1: D0010000 D0080000 40221000
44000000 }
{ 20 0 Internal Loopback FPGA Ver 12 FC-BB Board }
{ BUFFER_MEM 2.13 Gbps RATE }
{*FC-BB#1:B#2/D#1:PCI#2: D4010000 D4080000 40221000
44000000 }
{ 20 0 Intrd }