McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 243)

9
Configuring Tape Device Extension 9-35
Configuring Tape Device Extension
The default is 8.
12. Configure the Fibre Channel topology by selecting one of the
following choices in the Address Type drop-down menu:
13. From the LUN 0 drop-down menu, select either Emulate or
Passthru .
Show Source
WWN
Filtering
Select Fibre
Channel
Topology
Discover
LUN Count
LUN 0
Soft — The Fibre Channel topology comes up dynamically as
fabric or loop.
Hard — The Fibre Channel topology is forced to come up as a
loop.
P2P — The Fibre Channel topology is forced to come up as
point-to-point.