McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 297)

12
Hardware Maintenance 12-19
Replacing the Gigabit Ethernet Short Wave Transceiver
3. Pull the transceiver out of the interface card.
Installing the Gig-E
Short Wave SFP
Transceiver Use the installation procedure below to install all variations of the
Gig-E short wave transceivers.
Installing the Red
Plastic Tab Transceiver
1. Carefully position the long wave transceiver to insert it into the
interface card.
2. Slide the transceiver into the interface card until it clicks into
place.
Metal Clasp
Sb0
55