McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 - Manual (Page 43)

2
Hardware Configurations 2-3
UltraNet Edge 3000 Featurization
Table 2-4 WAN Connectivity Card Option Features
Component/Feature Description
10/100 Ethernet Card 1 port auto-sensing 10/100 Ethernet card.
Gigabit Ethernet Card 1 port auto-sensing Gigabit Ethernet (Gig-E) card,
option of short wave, long wave, or copper SFP
required.
OC-3 ATM Card 1 port OC-3 ATM card,
option of short wave or long wave SFP required.
Configuration requirements:
Each chassis must have at least one WAN connectivity card, with a maximum of two.
WAN connectivity cards may require SFP options, the requirements are as follows:
10/100 Ethernet does not require an SFP.
Gig-E requires one SFP per card, either short wave (multi-mode), long wave (single-mode),
or copper.
OC-3 ATM requires one SFP per card, either short wave (multi-mode) or long wave
(single-mode).
Table 2-5 WAN Connectivity SFP Option Features
Component/Feature Description
Short wave SFP for Gig-E Short wave (multi-mode) SFP for the Gig-E card.
Long wave SFP for Gig-E Long wave (single-mode) SFP for the Gig-E card.
Copper SFP for Gig-E Copper SFP for the Gig-E card.