GE Industrial Solutions Pulsar Plus Controller - Manual (Page 171)

Pulsar Plus Controller Family
Issue 7 December 2011 171
Appendix D: Default Configurations
Table D-1 Standard Configuration Item Defaults provides the default settings for the configurable
parameters and features that are associated in the controller. Also listed are the battery technologies and
specific battery models included in the configuration file. Specific battery models assume the configuration
defaults for their generic technology class except for a specific capacity and model name. The generic Valve
Regulated Lead Acid battery type will be the factory default Battery Type selected and configured for the
controller configuration. Changes to individual features, parameters, and thresholds for each battery type
will be allowed in the field. These changes will be stored in non-volatile memory. However, if the Load
Factory Defaults control/operation command is initiated, all assigned values shown in Table D-1 Standard
Configuration Item Defaults and Table C-1 Supported Battery Types will be restored. The configurations
made in the field will be lost.
There are four sections for determining the defaults for the standard configuration program file. These
sections are Standard, 24V Battery, 48V Battery, and Alarms. This document will show four separate tables
for these categories. In addition, the Excel spreadsheet is also attached.
The Standard section includes settings and thresholds independent of the primary output voltage of the
system. Generally, these items are set using information that does not depend on the battery reserve
system.
The 24V Battery section includes settings and thresholds that are generally dependent of the primary 24V
output voltage of the system. Generally, these items are set using information that depends on the battery
reserve system configured.
The 48V Battery section includes settings and thresholds that are generally dependent of the primary 48V
output voltage of the system. Generally, these items are set using information that depends on the battery
reserve system configured.
The Alarms section provides the assigned severities, alarm output relays, and LED assignments for the
standard configuration.
This document will continue to be revised and updated as feedback and additional requirements come in
from the field or as new configurable features and thresholds are added to the standard controller.
Features, thresholds, and other configurable items not addressed in the list will remain at the factory default
set for each respective item as defined in the standard product offering. Note: Custom configurations can
be made available through configuration of application or customer preferred defaults for the information in
the following tables for certain application.