GE Industrial Solutions Pulsar Plus Controller - Manual (Page 65)

Pulsar Plus Controller Family
Issue 7 December 2011 65
Configuration - Most configuration items from the front panel require PIN access.
Configuration not requiring PIN
1. Battery Type
2. String Battery Capacity (AH)
3. Number Of Battery Strings
4. Manual Discharge Test Type
5. Manual Test Duration
6. Manual Test Check Battery Alarm Voltage Threshold
7. Battery Test Rectifier Voltage
8. System Date Format
9. System Date
10. System Time Format
11. System Time
12. Automatic Daylight Savings Feature
13. Display Contrast
14. Temperature Display Units
15. Alarm Test Feature
16. Alarm Test Relay Duration and Relay
Once a user enters the PIN, total front panel access is allowed for:
• As long as the user remains in menus other than the default menu and/or
• The default display has remained on the front panel for more than user configurable time-out value.
Controllers have a factory configured default of 120 minutes. This time is adjustable between 1-120
minutes in 1 minute increments. 120 minutes is the factory default.
• An internal counter is kept and reset if the user leaves the default menu and returns to others
menus before the time-out period is reached.
Front Panel Menu Flow
The following figures provide a menu flow map for each primary category. This information is followed up
with brief descriptions of each of the menu items. Alarms and Warnings are not hierarchal mapped and are
presented in chronological order of occurrence when they are present. No Active Alarms or No Active
Warnings will be displayed when they are no alarms or warnings detected by the controller.