GE Industrial Solutions Pulsar Plus Controller - Manual (Page 60)

Pulsar Plus Controller Family
Issue 7 December 2011 60
Audible Alarm
The controller has an integrated audible alarm located in its display assembly. This alarm will
sound when any Critical, Major, or Minor alarm is detected by the controller. Upon assertion of
the audible alarm the default front panel will provide and indicator of the alarm as well as a
quick link to temporary cut-off the alarm.
Pressing the arrow key on a Pulsar controller or the ACO pushbutton on a Phoenix controller
provides a quickly temporarily sliences the audible alarm.
Once the audible cut-off is selected the alarms present in the system are listed. An indicator on
the default front panel screen is provided to inform that the audible alarm cutoff is active. The
audible alarm can also be turned-back on following similar procedures.
The audible alarm may be disabled altogether through proper configuration at the front panel or
through remote means.