GE Industrial Solutions Pulsar Plus Controller - Manual (Page 50)

Pulsar Plus Controller Family
Issue 7 December 2011 50
Web Interface Tabs
Reports The reports tab displays reports that the system controller can display through web pages.
These reports include Event History, Inventory, Statistics, Trends, and Battery on Discharge.
Individual history groups like Alarm History, Boost History, Login History, and Rectifier
history are also available.
Maintenance Allows remote access to Control/Operation commands that are available through the front
panel. These include restarting rectifiers/converters, starting alarm or battery tests,
asserting boost, clearing history and statistics, clearing latched events and missing
equipment, placing rectifiers/converters in and out of Standby, cutting of the audible
alarm. The T1.317 Terminal button provides a quick link to a Telnet session to the
controller that allows the T1.317 command interface to be utilized.
Note: The “Load Defaults” button under system loads the factory default settings assigned
to a specific battery type as defined in the defaults configuration file. In the Standard
controller this function will Standard configuration file. Custom configured controllers will
utilize the specific custom configuration file defined for that particular configuration.