Casella CEL CEL-281 - Manual (Page 136)

8 MANUFACTURERS SERVICING &
WARRANTY ARRANGEMENTS
In order to ensure its rigid conformity with the requirements of the speci-
fication, this instrument is thoroughly inspected and calibrated prior to
dispatch from the factory.
All technical information for an individual instrument is filed under the in-
strument serial number. Therefore the serial number should be quoted in
any correspondence concerning the instrument.
The manufacturers undertake to rectify any defect in the instrument that
is directly attributable to faulty design or assembly, and which becomes
apparent during the warranty period. In order to take advantage of this
warranty, the instrument must be returned, carriage paid, to the manufac-
turer's factory or accredited agent, where necessary repairs will be car-
ried out. Normally, the warranty period runs for 12 months from the date
of receipt of goods, with exceptions on certain specialised components
supplied by other manufacturers which are warranted for shorter periods.
Some of the specialised components used in this instrument may be sub-
ject to longer guarantees by their actual manufacturers, and in all such
cases, the benefit of these undertakings will be passed on to the user.
However, CEL Instruments Ltd's liability is limited to items of their own
manufacture, and they do not accept liability for any loss resulting from
the operation or interpretation of the results from this equipment.
A comprehensive Instrument Calibration Maintenance Agreement
(ICMA) scheme is available to extend the initial warranty period of this in-
strument. At the end of the first warranty period, it is recommended that
the equipment be returned to the Service and Re-calibration Department
at Hitchin, where it will be inspected and entered into the ICMA scheme
as required. The warranty will then be extended for the period stated on
the individual schedule. Please contact your local CEL agent for full de-
tails of this service.
Service & Warranty
CEL-281 Operator's Handbook - Page 127