H3C Technologies H3C S12500 Series Switches - Manual (Page 154)

141
Protocol type Value
PUP 0x0200
RARP 0x8035
IP 0x0800
IPv6 0x86DD
PPPoE 0x8863/0x8864
MPLS 0x8847/0x8848
IPX/SPX 0x8137
IS-IS 0x8000
LACP 0x8809
802.1X 0x888E
Cluster 0x88A7
Reserved 0xFFFD/0xFFFE/0xFFFF
QinQ configuration task list
Complete the follows tasks to configure QinQ:
Task Remarks
Enabling basic QinQ Required.
Configuring selective QinQ
Configuring an outer VLAN tagging
policy
Perform at least one of these
tasks.
Configuring an inner-outer VLAN
802.1p priority mapping policy
Setting the TPID value in VLAN tags Optional.
Enabling basic QinQ
CAUTION:
The basic QinQ function must be enabled on network devices in the service provider network with
customer networks connected to them.
To enable basic QinQ:
Step Command Remarks
1. Enter system view. system-view N/A