Configuring pe 2, Configuring pe 3 – H3C Technologies H3C S12500 Series Switches User Manual
Page 176
163
[PE1-GigabitEthernet4/0/1] quit
# Set network-side port GigabitEthernet 4/0/2 as a trunk port, and assign it to VLAN 100.
[PE1] interface gigabitethernet 4/0/2
[PE1-GigabitEthernet4/0/2] port link-type trunk
[PE1-GigabitEthernet4/0/2] port trunk permit vlan 100
Configuring PE 2
# Configure uplink policy down_uplink for customer-side port GigabitEthernet 4/0/2 to substitute
SVLAN ID 100 for the SVLAN ID in the incoming traffic tagged with CVLAN 10 and SVLAN 200.
<PE2> system-view
[PE2] traffic classifier down_uplink
[PE2-classifier-down_uplink] if-match customer-vlan-id 10
[PE2-classifier-down_uplink] if-match service-vlan-id 200
[PE2-classifier-down_uplink] quit
[PE2] traffic behavior down_uplink
[PE2-behavior-down_uplink] remark service-vlan-id 100
[PE2-behavior-down_uplink] quit
[PE2] qos policy down_uplink
[PE2-qospolicy-down_uplink] classifier down_uplink behavior down_uplink
[PE2-qospolicy-down_uplink] quit
# Set customer-side port GigabitEthernet 4/0/2 as a trunk port, and assign the port to VLAN 100. Apply
uplink policy down_uplink to the incoming traffic of the port.
[PE2] interface Gigabitethernet 4/0/2
[PE2-GigabitEthernet4/0/2] port link-type trunk
[PE2-GigabitEthernet4/0/2] port trunk permit vlan 100
[PE2-GigabitEthernet4/0/2] qos apply policy down_uplink inbound
[PE2-GigabitEthernet4/0/2] quit
# Set network-side port GigabitEthernet 4/0/1 as a trunk port, and assign it to VLAN 100.
[PE2] interface Gigabitethernet 4/0/1
[PE2-GigabitEthernet4/0/1] port link-type trunk
[PE2-GigabitEthernet4/0/1] port trunk permit vlan 100
[PE2-GigabitEthernet4/0/1] quit
Configuring PE 3
# Configure uplink policy down_uplink for customer-side port GigabitEthernet 4/0/1 to substitute
SVLAN ID 200 for the SVLAN ID in the incoming traffic tagged with CVLAN 10 and SVLAN 100.
<PE3> system-view
[PE3] traffic classifier down_uplink
[PE3-classifier-down_uplink] if-match customer-vlan-id 10
[PE3-classifier-down_uplink] if-match service-vlan-id 100
[PE3-classifier-down_uplink] quit
[PE3] traffic behavior down_uplink
[PE3-behavior-down_uplink] remark service-vlan-id 200
[PE3-behavior-down_uplink] quit
[PE3] qos policy down_uplink
[PE3-qospolicy-down_uplink] classifier down_uplink behavior down_uplink
[PE3-qospolicy-down_uplink] quit