Enabling gvrp compatibility, Displaying and maintaining mvrp – H3C Technologies H3C S12500 Series Switches User Manual

Page 254

Advertising
background image

241

Timer Lower

limit

Upper limit

LeaveAll

Leave timer on each port

32760 centiseconds

NOTE:

The MRP timers apply to all MRP applications, for example, MVRP, on a port. To avoid frequent VLAN
registrations and deregistrations, use the same MRP timers throughout the network.

Each port maintains its own Periodic, Join, and LeaveAll timers, and each attribute of a port maintains
a Leave timer.

Enabling GVRP compatibility

MVRP can be compatible with GVRP. When the peer device supports GVRP, you can enable GVRP

compatibility on the local end, so that the local end can receive and send MVRP and GVRP protocol

packets at the same time.
To enable GVRP compatibility:

Step Command

Remarks

1.

Enter system view

system-view N/A

2.

Enable GVRP
compatibility

mvrp gvrp-compliance

enable

By default, GVRP compatibility is disabled.

NOTE:

With GVRP compatibility enabled, MVRP can work with only STP or RSTP rather than MSTP. In this case,
if MVRP and MSTP run at the same time, the network might fail to work correctly.

With GVRP compatibility enabled, H3C recommends disabling the Periodic timer for MVRP. Otherwise,
the VLAN status might change frequently when the system is busy.

Displaying and maintaining MVRP

Task Command

Remarks

Display the MVRP status of
the specified port and each
MVRP interface in the

specified VLAN.

display mvrp state interface interface-type
interface-number
vlan vlan-id [ | { begin |

exclude | include } regular-expression ]

Available in any view.

Display the MVRP running
status.

display mvrp running-status [ interface
interface-list ] [ | { begin | exclude |

include } regular-expression ]

Available in any view.

Display the MVRP statistics.

display mvrp statistics [ interface
interface-list ] [ | { begin | exclude |

include } regular-expression ]

Available in any view.

Display the dynamic VLAN
operation information of
the specified port.

display mvrp vlan-operation interface
interface-type interface-number
[ | { begin
| exclude | include } regular-expression ]

Available in any view.

Advertising
This manual is related to the following products: