Verifying the configuration – H3C Technologies H3C S12500 Series Switches User Manual
Page 29
16
[DeviceA-vlan100] quit
[DeviceA] vlan 200
[DeviceA-vlan200] quit
# Associate the MAC address of Laptop 1 with VLAN 100, and the MAC address of Laptop 2 with
VLAN 200.
[DeviceA] mac-vlan mac-address 000d-88f8-4e71 vlan 100
[DeviceA] mac-vlan mac-address 0014-222c-aa69 vlan 200
# Configure Laptop 1 and Laptop 2 to access the network through GigabitEthernet 3/0/1:
Configure GigabitEthernet 3/0/1 as a hybrid port that sends packets of VLANs 100 and 200
untagged, and enable MAC-based VLAN on it.
[DeviceA] interface gigabitethernet 3/0/1
[DeviceA-GigabitEthernet3/0/1] port link-type hybrid
[DeviceA-GigabitEthernet3/0/1] port hybrid vlan 100 200 untagged
Please wait... Done.
[DeviceA-GigabitEthernet3/0/1] mac-vlan enable
[DeviceA-GigabitEthernet3/0/1] quit
# Configure the uplink port GigabitEthernet 3/0/2 as a trunk port, and assign it to VLANs 100
and 200. so that the laptops can access Server 1 and Server 2.
[DeviceA] interface gigabitethernet 3/0/2
[DeviceA-GigabitEthernet3/0/2] port link-type trunk
[DeviceA-GigabitEthernet3/0/2] port trunk permit vlan 100 200
[DeviceA-GigabitEthernet3/0/2] quit
2.
Configure Device B:
# Create VLANs 100 and 200. Assign GigabitEthernet 3/0/13 to VLAN 100, and
GigabitEthernet 3/0/14 to VLAN 200.
<DeviceB> system-view
[DeviceB] vlan 100
[DeviceB-vlan100] port GigabitEthernet 3/0/13
[DeviceB-vlan100] quit
[DeviceB] vlan 200
[DeviceB-vlan200] port GigabitEthernet 3/0/14
[DeviceB-vlan200] quit
# Configure GigabitEthernet 3/0/3 and GigabitEthernet 3/0/4 as trunk ports, and assign them
to VLANs 100 and 200.
[DeviceB] interface gigabitethernet 3/0/3
[DeviceB-GigabitEthernet3/0/3] port link-type trunk
[DeviceB-GigabitEthernet3/0/3] port trunk permit vlan 100 200
[DeviceB-GigabitEthernet3/0/3] quit
[DeviceB] interface gigabitethernet 3/0/4
[DeviceB-GigabitEthernet3/0/4] port link-type trunk
[DeviceB-GigabitEthernet3/0/4] port trunk permit vlan 100 200
[DeviceB-GigabitEthernet3/0/4] quit
3.
Configure Device C in the same way Device A is configured.
Verifying the configuration
1.
Laptop 1 can access Server 1 only, and Laptop 2 can access Server 2 only.