Pim-sm non-scoped zone configuration example, Network requirements – H3C Technologies H3C S7500E Series Switches User Manual

Page 184

Advertising
background image

6-47

Downstream interface(s) information:

Total number of downstreams: 3

1: Vlan-interface103

Protocol: pim-dm, UpTime: 00:03:27, Expires: never

2: Vlan-interface101

Protocol: pim-dm, UpTime: 00:03:27, Expires: never

3: Vlan-interface102

Protocol: pim-dm, UpTime: 00:03:27, Expires: never

PIM-SM Non-Scoped Zone Configuration Example

Network requirements

z

Receivers receive VOD information through multicast. The receiver groups of different

organizations form stub networks, and one or more receiver hosts exist in each stub

network. The entire PIM-SM domain contains only one BSR.

z

Host A and Host C are multicast receivers in two stub networks.

z

Switch D connects to the network that comprises the multicast source (Source) through

VLAN-interface 300.

z

Switch A connects to stub network N1 through VLAN-interface 100, and to Switch D and

Switch E through VLAN-interface 101 and VLAN-interface 102 respectively.

z

Switch B and Switch C connect to stub network N2 through their respective VLAN-interface

200, and to Switch E through VLAN-interface 103 and VLAN-interface 104 respectively.

z

Vlan-interface 105 on Switch D and Vlan-interface 102 on Switch E act as C-BSRs and

C-RPs; the C-BSR on Switch E has a higher priority; the multicast group range served by

the C-RP is 225.1.1.0/24; modify the hash mask length to map a certain number of

consecutive group addresses within the range to the two C-RPs.

z

IGMPv2 is to run between Switch A and N1, and between Switch B/Switch C and N2.

Advertising