H3C Technologies H3C S7500E Series Switches - Manual (Page 189)

6-52
(10.110.5.100, 225.1.1.0)
RP: 192.168.9.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:00:42
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface105
Protocol: pim-sm, UpTime: 00:00:42, Expires: 00:02:26
# View the PIM routing table information on Switch E.
[SwitchE] display pim routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, 225.1.1.0)
RP: 192.168.9.2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:13:16
Upstream interface: Register
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface102
Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:22
PIM-SM Admin-Scope Zone Configuration Example
Network requirements
z Receivers receive VOD information through multicast. The entire PIM-SM domain is
divided into admin-scope zone 1, admin-scope zone 2, and the global zone. Switch B,
Switch C, and Switch D are ZBRs of these three domains respectively.
z Source 1 and Source 2 send different multicast information to multicast group 239.1.1.1.
Host A receives the multicast information from only Source 1, while Host B receives the
multicast information from only Source 2. Source 3 sends multicast information to multicast
group 224.1.1.1. Host C is a multicast receiver for this multicast group.
z VLAN-interface 101 of Switch B acts as a C-BSR and C-RP of admin-scope zone 1, which
serve the multicast group range 239.0.0.0/8. VLAN-interface 104 of Switch D acts as a
C-BSR and C-RP of admin-scope zone 2, which also serve the multicast group range
239.0.0.0/8. VLAN-interface 109 of Switch F acts as C-BSRs and C-RPs of the global
scope zone, which serve all the multicast groups other than those in the 239.0.0.0/8 range.
z IGMPv2 is required between Switch A, Switch E, Switch I and their respective receivers.