Multicast traceroute, Concepts in multicast traceroute, Introduction to multicast traceroute packets – H3C Technologies H3C S7500E Series Switches User Manual

Page 91: Process of multicast traceroute, Configuration task list

Advertising
background image

4-7

Multicast Traceroute

The multicast traceroute utility is used to trace the path that a multicast stream flows down from

the first-hop router to the last-hop router.

Concepts in multicast traceroute

1) Last-hop router: If a router has one of its interfaces connecting to the subnet the given

destination address is on, and if the router is able to forward multicast streams from the

given multicast source onto that subnet, that router is called last-hop router.

2) First-hop router: the router that directly connects to the multicast source.

3) Querier: the router requesting the multicast traceroute.

Introduction to multicast traceroute packets

A multicast traceroute packet is a special IGMP packet, which differs from common IGMP

packets in that its IGMP Type field is set to 0x1F or 0x1E and that its destination IP address is a

unicast address. There are three types of multicast traceroute packets:

z

Query, with the IGMP Type field set to 0x1F,

z

Request, with the IGMP Type field set to 0x1F, and

z

Response, with the IGMP Type field set to 0x1E.

Process of multicast traceroute

1) The querier sends a query to the last-hop router.

2) Upon receiving the query, the last-hop router turns the query packet into a request packet

by adding a response data block containing its interface addresses and packet statistics to

the end of the packet, and forwards the request packet via unicast to the previous hop for

the given multicast source and group.

3) From the last-hop router to the multicast source, each hop adds a response data block to

the end of the request packet and unicasts it to the previous hop.

4) When the first-hop router receives the request packet, it changes the packet type to

indicate a response packet, and then sends the completed packet via unicast to the

multicast traceroute querier.

Configuration Task List

Complete these tasks to configure multicast routing and forwarding:

Task

Remarks

Enabling IP Multicast Routing

Optional

Configuring Multicast Static Routes

Optional

Configuring a Multicast Routing Policy

Optional

Configuring a Multicast Forwarding Range

Optional

Configuring the Multicast Forwarding Table Size

Optional

Configuring Multicast

Routing and Forwarding

Configuring Static Multicast MAC Address Entries

Optional

Advertising