H3C Technologies H3C S7500E Series Switches - Manual (Page 404)

14-2
This document covers configuration tasks related to multi-protocol BGP for IPv6 multicast only.
For BGP related information, refer to BGP Configuration in the Layer 3 - IP Routing
Configuration Guide.
For information about RPF, refer to Multicast Routing and Forwarding in the IP Multicast
Configuration Guide.
IPv6 MBGP Configuration Task List
Complete the following tasks to configure IPv6 MBGP:
Task Remarks
Configuring an IPv6 MBGP Peer Required
Configuring IPv6 MBGP Basic
Functions
Configuring a Preferred Value for Routes from a
Peer/Peer Group
Optional
Injecting a Local IPv6 MBGP Route Optional
Configuring IPv6 MBGP Route Redistribution Optional
Configuring IPv6 MBGP Route Summarization Optional
Advertising a Default Route to a Peer or Peer
Group
Optional
Configure Outbound IPv6 MBGP Route Filtering Optional
Configuring Inbound IPv6 MBGP Route Filtering Optional
Controlling Route Distribution
and Reception
Configuring IPv6 MBGP Route Dampening Optional
Configuring IPv6 MBGP Route Preferences
Configuring the Default Local Preference
Configuring the MED Attribute
Optional
Configuring the NEXT_HOP Attribute Optional
Configuring IPv6 MBGP Route
Attributes
Configuring the AS_PATH Attribute Optional
Configuring IPv6 MBGP Soft Reset Optional
Enabling the MBGP ORF Capability Optional Tuning and Optimizing IPv6
MBGP Networks
Configuring the Maximum Number of Equal-Cost
Routes for Load-Balancing
Optional