Displaying and maintaining mld configuration – H3C Technologies H3C S7500E Series Switches User Manual

Page 342

Advertising
background image

12-22

To do…

Use the command…

Remarks

Enter interface view

interface interface-type

interface-number

Enable IPv6 multicast forwarding on

a non-querier downstream interface

mld proxying forwarding

Required

Disabled by default

On a multi-access network with more than one MLD proxy devices, you cannot enable IPv6 multicast

forwarding on any other non-querier downstream interface after one of the downstream interfaces of

these MLD proxy devices has been elected as the querier. Otherwise, duplicate multicast flows may

be received on the multi-access network.

Displaying and Maintaining MLD Configuration

To do…

Use the command…

Remarks

Display MLD multicast group

information

display mld group [ ipv6-group-address | interface

interface-type interface-number ] [ static | verbose ]

Available in

any view

Display Layer 2 port information

about MLD multicast groups (on

a distributed device)

display mld group port-info [ vlan vlan-id ] [ slot

slot-number ] [ verbose ]

Available in

any view

Display the Layer 2 port

information of MLD multicast

groups (on a distributed IRF

device)

display mld group port-info [ vlan vlan-id ] [ chassis

chassis-number slot slot-number ] [ verbose ]

Available in

any view

Display MLD configuration and

running information on the

specified interface or all

MLD-enabled interfaces

display mld interface [ interface-type interface-number ]

[ verbose ]

Available in

any view

Display the information of the

MLD proxying groups

display mld proxying group [ group-address ]

[ verbose ]

Available in

any view

Display the information of the

MLD routing table

display mld routing-table [ ipv6-source-address

[ prefix-length ] | ipv6-group-address [ prefix-length ] | flags

{ act | suc } ] *

Available in

any view

Display MLD SSM mappings

display mld ssm-mapping ipv6-group-address

Available in

any view

Advertising