H3C Technologies H3C S7500E Series Switches - Manual (Page 348)

12-28
Total 1 MLD SSM-mapping Group(s).
Interface group report information
Vlan-interface400 (4001::2):
Total 1 MLD SSM-mapping Group reported
Group Address: FF3E::101
Last Reporter: 4001::1
Uptime: 00:02:04
Expires: off
Use the display pim ipv6 routing-table command to view the IPv6 PIM routing table information on
each switch.
# Display the IPv6 PIM routing table information on Switch D.
[SwitchD] display pim ipv6 routing-table
Total 0 (*, G) entry; 2 (S, G) entry
(1001::1, FF3E::101)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: Vlan-interface104
Upstream neighbor: 1003::1
RPF prime neighbor: 1003::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface400
Protocol: mld, UpTime: 00:13:25, Expires: -
(3001::1, FF3E::101)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: Vlan-interface103
Upstream neighbor: 3002::1
RPF prime neighbor: 3002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface400
Protocol: mld, UpTime: 00:13:25, Expires: -
MLD Proxying Configuration Example
Network requirements
z IPv6 PIM-DM is required to run on the core network. Host A and Host C in the stub network
receive VOD information destined to multicast group FF3E::101.
z It is required to configure the MLD proxying feature on Switch B so that Switch B can maintain
group memberships and forward IPv6 multicast traffic without running IPv6 PIM-DM.