H3C Technologies H3C S7500E Series Switches - Manual (Page 236)

8-2
z This document covers configuration tasks related to multiprotocol BGP for IP multicast only. For
information about BGP, refer to BGP Configuration in the Layer 3 - IP Routing Configuration
Guide.
z For information about RPF, refer to Multicast Routing and Forwarding in the IP Multicast
Configuration Guide.
Protocols and Standards
z RFC2858: Multiprotocol Extensions for BGP-4
z RFC3392: Capabilities Advertisement with BGP-4
z draft-ietf-idmr-bgp-mcast-attr-00: BGP Attributes for Multicast Tree Construction
z RFC4271: A Border Gateway Protocol 4 (BGP-4)
z RFC5291: Outbound Route Filtering Capability for BGP-4
z RFC5292: Address-Prefix-Based Outbound Route Filter for BGP-4
MBGP Configuration Task List
Complete the following tasks to configure MBGP:
Task Remarks
Configuring MBGP Basic Functions Required
Configuring MBGP Route Redistribution Required
Configure Default Route Redistribution into MBGP Optional
Configuring MBGP Route Summarization Optional
Advertising a Default Route to an IPv4 MBGP Peer or Peer
Group
Optional
Configuring Outbound MBGP Route Filtering Optional
Configuring Inbound MBGP Route Filtering Optional
Controlling Route
Advertisement and
Reception
Configuring MBGP Route Dampening
Configuring MBGP Route Preferences
Configuring the Default Local Preference
Configuring the MED Attribute
Configuring the Next Hop Attribute
Configuring MBGP
Route Attributes
Configuring the AS-PATH Attribute
Optional