Pim-ssm configuration example, Network requirements – H3C Technologies H3C S7500E Series Switches User Manual
Page 195
6-58
Priority: 0
HoldTime: 150
Uptime: 00:06:54
Expires: 00:02:41
# View the RP information on Switch F.
[SwitchF] display pim rp-info
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1 (local)
Priority: 0
HoldTime: 150
Uptime: 00:00:32
Expires: 00:01:58
PIM-SSM Configuration Example
Network requirements
z
Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub
network. The entire PIM domain operates in the SSM mode.
z
Host A and Host C are multicast receivers in two stub networks.
z
Switch D connects to the network that comprises the multicast source (Source) through
VLAN-interface 300.
z
Switch A connects to stub network N1 through VLAN-interface 100, and to Switch D and
Switch E through VLAN-interface 101 and VLAN-interface 102 respectively.
z
Switch B and Switch C connect to stub network N2 through their respective VLAN-interface
200, and to Switch E through VLAN-interface 103 and VLAN-interface 104 respectively.
z
Switch E connects to Switch A, Switch B, Switch C and Switch D.
z
The SSM group range is 232.1.1.0/24.
z
IGMPv3 is to run between Switch A and N1, and between Switch B/Switch C and N2.