H3C Technologies H3C S7500E Series Switches - Manual (Page 274)

9-18
To do... Use the command... Remarks
Enter system view system-view —
Enter MLD snooping view mld-snooping —
Configure the maximum
response time for MLD general
queries
max-response-time interval
Optional
10 seconds by default
Configure the MLD
last-member query interval
last-listener-query-interval
interval
Optional
1 second by default
Configuring MLD queries and responses in a VLAN
Follow these steps to configure MLD queries and responses in a VLAN
To do... Use the command... Remarks
Enter system view system-view —
Enter VLAN view vlan vlan-id —
Configure MLD query interval
mld-snooping query-interval
interval
Optional
125 seconds by default
Configure the maximum
response time for MLD general
queries
mld-snooping
max-response-time interval
Optional
10 seconds by default
Configure the MLD
last-member query interval
mld-snooping
last-listener-query-interval
interval
Optional
1 second by default
Make sure that the MLD query interval is greater than the maximum response time for MLD
general queries; otherwise undesired deletion of IPv6 multicast members may occur.
Configuring Source IPv6 Addresses of MLD Queries
This configuration allows you to change the source IPv6 address of MLD queries.
Follow these steps to configure source IPv6 addresses of MLD queries:
To do... Use the command... Remarks
Enter system view system-view —