H3C Technologies H3C S5560 Series Switches User Manual
Page 121
87
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Specify a standard for the
device to use when it
calculates the default path
costs of its ports.
stp pathcost-standard
{ dot1d-1998 | dot1t | legacy }
The default setting is legacy.
Table 10 Mappings between the link speed and the path cost
Link speed
Port type
Path cost
IEEE
802.1d-1998
IEEE 802.1t
Private standard
0 N/A
65535
200000000
200000
10 Mbps
Single port
100
2000000 2000
Aggregate interface
containing two Selected
ports
1000000 1800
Aggregate interface
containing three Selected
ports
666666 1600
Aggregate interface
containing four Selected
ports
500000 1400
100 Mbps
Single port
19
200000 200
Aggregate interface
containing two Selected
ports
100000 180
Aggregate interface
containing three Selected
ports
66666 160
Aggregate interface
containing four Selected
ports
50000 140
1000 Mbps
Single port
4
20000 20
Aggregate interface
containing two Selected
ports
10000 18
Aggregate interface
containing three Selected
ports
6666 16
Aggregate interface
containing four Selected
ports
5000 14
10 Gbps
Single port
2
2000
2