H3C Technologies H3C S5560 Series Switches User Manual
Page 55
21
c.
Create file info.log in the Device directory to save logs from Device.
# touch /var/log/Device/info.log
d.
Edit the file syslog.conf in directory /etc/ and add the following contents:
# Device configuration messages
local4.info /var/log/Device/info.log
In this configuration, local4 is the name of the logging facility that the log host uses to receive
logs, and info is the informational level. The UNIX system records the log information that has
a severity level of at least informational to the file /var/log/Device/info.log.
e.
Display the process ID of syslogd, end the syslogd process, and then restart syslogd using the
–r option to make the new configuration take effect.
# ps -ae | grep syslogd
147
# kill -HUP 147
# syslogd -r &
The device can output MAC address logs to the log host, which stores the logs to the specified file.
3.
Enable MAC Information on Device:
# Enable MAC Information globally.
[Device] mac-address information enable
# Configure the MAC Information mode as syslog.
[Device] mac-address information mode syslog
# Enable MAC Information on interface GigabitEthernet 1/0/1 to enable GigabitEthernet 1/0/1
to record MAC address change information when the interface performs either of the following
operations:
{
Learns a new MAC address.
{
Deletes an existing MAC address.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] mac-address information enable added
[Device-GigabitEthernet1/0/1] mac-address information enable deleted
[Device-GigabitEthernet1/0/1] quit
# Set the MAC Information queue length to 100.
[Device] mac-address information queue-length 100
# Set the MAC change notification interval to 20 seconds.
[Device] mac-address information interval 20