Configuring the mac learning limit on an interface – H3C Technologies H3C S5560 Series Switches User Manual

Page 43

Advertising
background image

9

To disable MAC address learning on a VLAN:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable global MAC address
learning.

mac-address mac-learning enable

By default, global MAC address
learning is enabled.

3.

Enter VLAN view.

vlan vlan-id

N/A

4.

Disable MAC address

learning on the VLAN.

undo mac-address mac-learning
enable

By default, MAC address learning
on the VLAN is enabled.

Configuring the aging timer for dynamic MAC

address entries

For security and efficient use of table space, the MAC address table uses an aging timer for each

dynamic MAC address entry. If a dynamic MAC address entry is not updated before the aging timer

expires, the device deletes the entry. This aging mechanism ensures that the MAC address table can

promptly update to accommodate latest network topology changes.
A stable network requires a longer aging interval, and an unstable network requires a shorter aging

interval.
An aging interval that is too long might cause the MAC address table to retain outdated entries. As a

result, the MAC address table resources might be exhausted, and the MAC address table might fail to
update to accommodate the latest network changes.
An interval that is too short might result in removal of valid entries, which would cause unnecessary

floods and possibly affect the device performance.
To reduce floods on a stable network, set a long aging timer or disable the timer to prevent dynamic
entries from unnecessarily aging out. Reducing floods improves the network performance. Reducing

flooding also improves the security because it reduces the chances for a data frame to reach unintended

destinations.
To configure the aging timer for dynamic MAC address entries:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Configure the aging timer for
dynamic MAC address

entries.

mac-address timer { aging seconds
| no-aging }

By default, the aging timer for
dynamic MAC address entries is

300 seconds
The no-aging keyword disables the

aging timer.

Configuring the MAC learning limit on an interface

This feature limits the MAC address table size. A large MAC address table will degrade forwarding

performance..

Advertising