Verifying the configuration – H3C Technologies H3C S5560 Series Switches User Manual

Page 93

Advertising
background image

59

Verifying the configuration

# Display information about isolation group 2.

[Device] display port-isolate group 2

Port isolation group information:

Group ID: 2

Group members:

GigabitEthernet1/0/1

GigabitEthernet1/0/2

GigabitEthernet1/0/3

The output shows that interfaces GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet
1/0/3 are assigned to isolation group 2. As a result, Host A, Host B, and Host C are isolated from each

other at layer 2.

Advertising
This manual is related to the following products:

H3C S5130 Series Switches, H3C S5120 Series Switches, H3C SR8800, H3C SR6600-X, H3C SR6600, H3C MSR 5600, H3C MSR 50, H3C MSR 3600, H3C MSR 30, H3C MSR 2600, H3C MSR 20-2X[40], H3C MSR 20-1X, H3C MSR 930, H3C MSR 900, H3C WX6000 Series Access Controllers, H3C WX5000 Series Access Controllers, H3C WX3000 Series Unified Switches, H3C LSWM1WCM10 Access Controller Module, H3C LSWM1WCM20 Access Controller Module, H3C LSQM1WCMB0 Access Controller Module, H3C LSRM1WCM2A1 Access Controller Module, H3C LSBM1WCM2A0 Access Controller Module

Popular Brands
Popular manuals