H3C Technologies H3C S5560 Series Switches User Manual
Page 69
35
Step
Command
Remarks
2.
Set the
system
LACP
priority.
lacp system-priority system-priority
By default, the system LACP priority
is 32768.
Changing the system LACP priority
might affect the aggregation state
of the ports in the dynamic
aggregation group.
3.
Create a
Layer 3
aggregat
e
interface
and enter
Layer 3
aggregat
e
interface
view.
interface route-aggregation
interface-number
When you create a Layer 3
aggregate interface, the system
automatically creates a Layer 3
static aggregation group
numbered the same.
4.
Configur
e the
aggregat
ion
group to
operate
in
dynamic
aggregat
ion
mode.
link-aggregation mode dynamic
By default, an aggregation group
operates in static aggregation
mode.
5.
Exit to
system
view.
quit
N/A
6.
Assign
an
interface
to the
specified
Layer 3
aggregat
ion
group.
a.
Enter Layer 3 Ethernet
interface view:
interface interface-type
interface-number
b.
Assign
the
interface
to the
specified
Layer 3
aggregat
ion
group:
port
link-aggr
egation
group
number
Repeat these two sub-steps to
assign more Layer 3 Ethernet
interfaces to the aggregation
group.