Displaying and maintaining mvrp, Mvrp configuration example, Network requirements – H3C Technologies H3C S5560 Series Switches User Manual
Page 224
190
Displaying and maintaining MVRP
Execute display commands in any view and reset commands in user view.
Task Command
Display MVRP running status.
display mvrp running-status [ interface interface-list ]
Display the MVRP state of a port in a
VLAN.
display mvrp state interface interface-type interface-number vlan
vlan-id
Display MVRP statistics.
display mvrp statistics [ interface interface-list ]
Clear MVRP statistics.
reset mvrp statistics [ interface interface-list ]
MVRP configuration example
Network requirements
As shown in
•
Create VLAN 10 on Device A and VLAN 20 on Device B.
•
Configure MSTP, map VLAN 10 to MSTI 1, map VLAN 20 to MSTI 2, and map the other VLANs to
MSTI 0.
Configure MVRP on Device A, Device B, Device C, and Device D to meet the following requirements:
•
The devices can register and deregister dynamic VLANs.
•
The devices can keep identical VLAN configuration for each MSTI.