H3C Technologies H3C S5560 Series Switches User Manual
Page 67
Advertising
33
Step
Command
Remarks
2.
Set the
system
LACP
priority.
lacp system-priority system-priority
By default, the system LACP priority
is 32768.
Changing the system LACP priority
might affect the aggregation state
of the ports in a dynamic
aggregation group.
3.
Create a
Layer 2
aggregat
e
interface
and enter
Layer 2
aggregat
e
interface
view.
interface bridge-aggregation
interface-number
When you create a Layer 2
aggregate interface, the system
automatically creates a Layer 2
static aggregation group
numbered the same.
4.
Configur
e the
aggregat
ion
group to
operate
in
dynamic
aggregat
ion
mode.
link-aggregation mode dynamic
By default, an aggregation group
operates in static aggregation
mode.
5.
Exit to
system
view.
quit
N/A
Advertising
This manual is related to the following products: