H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 156)

19-17
Disableport Timeout: 20s
OUI value:
GigabitEthernet0/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
Use the following command to view MAC authentication information:
<AC> display mac-authentication interface gigabitethernet 0/0/1
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 300s
Quiet period is 60s
Server response timeout value is 100s
The max allowed user number is 1024 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent MAC User info:
MAC Addr From Port Port Index
GigabitEthernet0/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 1
Current online user number is 3
MAC Addr Authenticate State Auth Index
1234-0300-0011 MAC_AUTHENTICATOR_SUCCESS 13
1234-0300-0012 MAC_AUTHENTICATOR_SUCCESS 14
1234-0300-0013 MAC_AUTHENTICATOR_SUCCESS 15
Use the following command to view 802.1x authentication information:
<AC> display dot1x interface gigabitethernet 0/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Configuration: Transmit Period 30 s, Handshake Period 15 s
Quiet Period 60 s, Quiet Period Timer is disabled
Supp Timeout 30 s, Server Timeout 100 s
The maximal retransmitting times 2
EAD quick deploy configuration:
EAD timeout: 30 m
The maximum 802.1X user resource number is 1024 per slot