H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 596)

63-17
To do… Use the command… Remarks
Configure the number of probes in
a test
probe count times
Optional
By default, one probe is performed
in a test.
Configure the NQA probe timeout
time
probe timeout timeout
Optional
By default, the timeout time is 3000
milliseconds.
This parameter is not available for
a UDP-jitter test.
Configure the maximum number of
history records that can be saved
in a test group
history-records number
Optional
50 by default.
Configure the maximum number of
hops a probe packet traverses in
the network
ttl value
Optional
20 by default.
This parameter is not available for
a DHCP test.
Configure the ToS field in an IP
packet header in an NQA probe
packet
tos value
Optional
0 by default.
This parameter is not available for
a DHCP test.
Enable the routing table bypass
function
route-option bypass-route
Optional
Disabled by default.
This parameter is not available for
a DHCP test.
Scheduling an NQA Test Group
With this configuration, you can set the start time and time period for a test group to perform the test and
start the test.
Configuration prerequisites
Before scheduling an NQA test group, make sure:
z
Required test parameters corresponding to a test type have been configured;
z
For the test which needs the cooperation with the NQA server, configuration on the NQA server
has been completed.
Scheduling an NQA test group
Follow these steps to schedule an NQA test group:
To do… Use the command… Remarks
Enter system view system-view —
Schedule an NQA test group
nqa schedule admin-name
operation-tag start-time now
lifetime
forever
Required
Configure the maximum number of
the tests that the NQA client can
simultaneously perform
nqa agent max-concurrent
number
Optional
The default number is 2