H3C Technologies H3C WX6000 Series Access Controllers User Manual
Page 647
67-5
[AC-pki-domain-1] certificate request entity en
[AC-pki-domain-1] quit
# Generate a key pair locally by using the RSA algorithm.
[AC] public-key local create rsa
# Obtain a server certificate from CA.
[AC] pki retrieval-certificate ca domain 1
# Apply for a local certificate.
[AC] pki request-certificate domain 1
2) Configure an SSL server policy associated with the HTTPS service
# Configure SSL server policy.
[AC] ssl server-policy myssl
[AC-ssl-server-policy-myssl] pki-domain 1
[AC-ssl-server-policy-myssl] client-verify enable
[AC-ssl-server-policy-myssl] quit
3) Configure
certificate access control policy
# Configure certificate attribute group.
[AC] pki certificate attribute-group mygroup1
[AC-pki-cert-attribute-group-mygroup1] attribute 1 issuer-name dn ctn new-ca
[AC-pki-cert-attribute-group-mygroup1] quit
# Configure certificate access control policy myacp and create a control rule.
[AC] pki certificate access-control-policy myacp
[AC-pki-cert-acp-myacp] rule 1 permit mygroup1
[AC-pki-cert-acp-myacp] quit
4) Reference an SSL server policy
# Associate the HTTPS service with the SSL server policy myssl.
[AC] ip https ssl-server-policy myssl
5) Associate the HTTPS service with a certificate attribute access control policy
# Associate the HTTPS service with a certificate attribute access control policy myacp.
[AC] ip https certificate access-control-policy myacp
6) Enable the HTTPS service
# Enable the HTTPS service.
[AC] ip https enable
7) Verify the configuration
Launch the IE explorer on Host, and enter https://10.1.1.1. You can log onto AC and control it.
z
For details of PKI commands, refer to PKI in H3C WX6103 Access Controller Switch Interface
Board Command Reference
.
z
For details of the public-key local create rsa command, refer to SSH in H3C WX6103 Access
Controller Switch Interface Board Command Reference
.