H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 351)

31-4
MED related LLDP TLVs
z
LLDP-MED capabilities TLV, which carries the MED type of the current device and the types of the
LLDP MED TLVs that can be encapsulated in LLDPDUs.
z
Network policy TLV, which carries port VLAN ID, supported applications (such as voice and video
services), application priority, and the policy adopted.
z
Extended power-via-MDI TLV, which carries the information about the power supply capability of
the current device.
z
Hardware revision TLV, which carries the hardware version of an MED device.
z
Firmware revision TLV, which carries the firmware version of an MED device.
z
Software revision TLV, which carries the software version of an MED device.
z
Serial number TLV, which carries the serial number of an MED device.
z
Manufacturer name TLV, which carries the manufacturer name of an MED device.
z
Model name TLV, which carries the model of an MED device.
z
Asset ID TLV, which carries the asset ID of an MED device. Asset ID is used for directory
management and asset tracking.
z
Location identification TLV, which carries the location identification of a device. Location
identification can be used in location-based applications.
For detailed information about LLDP TLV, refer to IEEE 802.1AB-2005 and ANSI/TIA-1057.
Protocols and Standards
z
IEEE 802.1AB-2005, Station and Media Access Control Connectivity Discovery
z
ANSI/TIA-1057, Link Layer Discovery Protocol for Media Endpoint Devices
LLDP Configuration Tasks List
Complete these tasks to configure LLDP:
Task Remarks
Enabling LLDP Required
Setting LLDP Operating Mode Optional
Configuring LLDPDU TLVs Optional
Enable LLDP Polling Optional
Basic LLDP
configuration
Configuring the Parameters Concerning LLDPDU Sending Optional
Configuring LLDP Trap Optional