H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 75)

8-7
Verification
# Display information about the OUI addresses, OUI address masks, and descriptive strings.
<AC> display voice vlan oui
Oui Address Mask Description
0001-e300-0000 ffff-ff00-0000 Siemens phone
0003-6b00-0000 ffff-ff00-0000 Cisco phone
0004-0d00-0000 ffff-ff00-0000 Avaya phone
0011-2200-0000 ffff-ff00-0000
0060-b900-0000 ffff-ff00-0000 Philips/NEC phone
00d0-1e00-0000 ffff-ff00-0000 Pingtel phone
00e0-7500-0000 ffff-ff00-0000 Polycom phone
00e0-bb00-0000 ffff-ff00-0000 3com phone
# Display the current Voice VLAN state.
<AC> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 100 minutes
Voice VLAN enabled port and its mode:
PORT MODE
--------------------------------
GigabitEthernet0/0/1 AUTO
<AC>
Device in this configuration example refers to a device that supports VLAN in a generic sense.
Manual Voice VLAN Mode Configuration Example
Network requirement
z
Create VLAN 2 and configure it as a voice VLAN.
z
The voice traffic sent by the IP phones is untagged. Configure GigabitEthernet 0/0/1 as a Hybrid
port and as the access port.
z
GigabitEthernet 0/0/1 works in manual mode. It only allows voice packets with an OUI address of
0011-2200-0000, a mask of ffff-ff00-0000, and a descriptive string of test to be forwarded through
the voice VLAN.