H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 564)

60-6
By default, the <Ctrl+G>, <Ctrl+L> and <Ctrl+O> hotkeys are configured with command line and the
<Ctrl+T> and <Ctrl+U> commands are NULL.
z
<Ctrl+G> corresponds to the display current-configuration command.
z
<Ctrl+L> corresponds to the display ip routing-table command.
z
<Ctrl+O> corresponds to the undo debugging all command.
Table 60-2 Hotkeys reserved by the system
Hotkey Function
<Ctrl+A> Moves the cursor to the beginning of the current line.
<Ctrl+B> Moves the cursor one character to the left.
<Ctrl+C> Stops performing a command.
<Ctrl+D> Deletes the character at the current cursor position.
<Ctrl+E> Moves the cursor to the end of the current line.
<Ctrl+F> Moves the cursor one character to the right.
<Ctrl+H> Deletes the character to the left of the cursor.
<Ctrl+K> Terminates an outgoing connection.
<Ctrl+N> Displays the next command in the history command buffer.
<Ctrl+P> Displays the previous command in the history command buffer.
<Ctrl+R> Redisplays the current line information.
<Ctrl+V> Pastes the content in the clipboard.
<Ctrl+W> Deletes all the characters in a continuous string to the left of the cursor.
<Ctrl+X> Deletes all the characters to the left of the cursor.
<Ctrl+Y> Deletes all the characters to the right of the cursor.
<Ctrl+Z> Exits to user view.
<Ctrl+]> Terminates an incoming connection or a redirect connection.
<Esc+B> Moves the cursor to the leading character of the continuous string to the left.
<Esc+D>
Deletes all the characters of the continuous string at the current cursor position and to the
right of the cursor.
<Esc+F> Moves the cursor to the front of the next continuous string to the right.
<Esc+N> Moves the cursor down by one line (available before you press the Enter key)
<Esc+P> Moves the cursor up by one line (available before you press the Enter key)
<Esc+<> Specifies the cursor as the beginning of the clipboard.
<Esc+>> Specifies the cursor as the ending of the clipboard.