H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 549)

59-7
LOG TRAP DEBUG
Output
destinatio
n
Modules
allowed Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
Enabled/d
isabled
Severity
SNMP
NMS default (all
modules)
Disabled debugging Enabled warnings Disabled debugging
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do… Use the command… Remarks
Enable the monitoring of system
information on the console
terminal monitor
Optional
Enabled on the console and
disabled on the monitoring terminal
by default.
Enable the display of debugging
information on the console
terminal debugging
Required
Disabled by default
Enable the display of log
information on the console
terminal logging
Optional
Enabled by default
Enable the display of trap
information on the console
terminal trapping
Optional
Enabled by default
Setting to Output System Information to a Monitor Terminal
System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, or VTY user interface.
Setting to output system information to a monitor terminal
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a specified
channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
Table 59-2 for default
channel names.
Configure the channel through
which system information can be
output to a monitor terminal
info-center monitor channel
{ channel-number | channel-name }
Optional
System information is output to the
monitor terminal by default with
channel 1 as the default channel.
Configure the output rules of the
system information
info-center source
{ module-name | default } channel
{ channel-number | channel-name }
[ debug { level severity | state
state
} * | log { level severity | state
state } * | trap { level severity |
state state } * ] *
Optional
Refer to
Table 59-4 for the default
output rules of the system
information.