H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 523)

56-3
To do… Use the command… Remarks
Copy a file copy fileurl-source fileurl-dest
Optional
Available in user view
Move a file move fileurl-source fileurl-dest
Optional
Available in user view
Display files or directories dir [ /all ] [ file-url ]
Optional
Available in user view
Enter system view system-view —
Execute the batch file execute filename Optional
You can create a file by copying or downloading or using the save command.
z
Empty the recycle bin timely with the reset recycle-bin command to save memory space.
z
As the delete /unreserved file-url command deletes a file permanently and the action cannot be
undone, use it with caution.
z
The execute command cannot ensure the execution of each command. For example, if a certain
command is not correctly configured, the system will omit this command and go to the next one.
Therefore, each configuration command in a batch file must be a standard configuration command,
meaning the valid configuration information which can be displayed with the display
current-configuration command after this command is configured successfully; otherwise, this
command may not be executed correctly.
Storage Device Operations
Naming rules
Naming rules of the storage devices are as follows:
z
If there is only one storage device of the same type on the device, the physical device name of the
storage device is the storage device name.
z
If there are multiple storage devices with the same type on the device, the physical device name of
the storage device is composed of the storage device type and the serial number of the storage
device. The serial number is displayed in English letters such as a, b or c.
z
If storage device partitioning is supported on the device, the name of the partition device is
composed of the physical device name and partition number. The serial numbers of partitions are
displayed in numbers such as 0, 1 or 2.