H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 347)

30-4
# Create VLAN 1024, assign GigabitEthernet 0/0/1 to this VLAN and enable IGMP Snooping in the
VLAN.
[AC] vlan 1024
[AC-vlan1024] port GigabitEthernet 0/0/1
[AC-vlan1024] igmp-snooping enable
[AC-vlan1024] quit
# Configure VLAN 1024 as multicast VLAN and configure VLAN 11 through VLAN 13 as its sub-VLANs.
[AC] multicast-vlan 1024 enable
[AC] multicast-vlan 1024 subvlan 11 to 13
4) Verify the configuration
# Display information about the multicast VLAN and its sub-VLANs.
[AC] display multicast-vlan
multicast vlan 1024's subvlan list:
Vlan 11-13