H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 336)

36-7
z
If the ACL is created with the auto keyword specified, the newly created rules will be inserted in the
existent ones by depth-first principle, but the numbers of the existent rules are unaltered.
Configuration Example
# Configure ACL 3000 to permit the TCP packets sourced from the network 129.9.0.0/16 and destined
for the network 202.38.160.0/24 and with the destination port number being 80.
<device> system-view
[device] acl number 3000
[device-acl-adv-3000] rule permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0
0.0.0.255 destination-port eq 80
# Display the configuration information of ACL 3000.
[device-acl-adv-3000] display acl 3000
Advanced ACL 3000, 1 rule
Acl's step is 1
rule 0 permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0 0.0.0.255
destination-port eq www
Configuring Layer 2 ACL
Layer 2 ACLs filter packets according to their Layer 2 information, such as the source and destination
MAC addresses, VLAN priority, and Layer 2 protocol types.
A Layer 2 ACL can be numbered from 4000 to 4999.
Configuration Prerequisites
z
To configure a time range-based Layer 2 ACL rule, you need to create the corresponding time
ranges first. For information about time range configuration, refer to
Configuring Time Range .
z
The settings to be specified in the rule, such as source and destination MAC addresses, VLAN
priorities, and Layer 2 protocol types, are determined.
Configuration Procedure
Follow these steps to define a Layer 2 ACL rule:
To do… Use the command… Remarks
Enter system view system-view —
Create a Layer 2 ACL and
enter layer 2 ACL view
acl number acl-number Required
Define an ACL rule
rule [ rule-id ] { permit | deny }
rule-string
Required
For information about rule-string, refer to
ACL
in H3C WX3000 Series Unified
Switches Switching Engine Command
Reference
.
Assign a description
string to the ACL rule
rule rule-id comment text
Optional
No description by default
Assign a description
string to the ACL
description text
Optional
No description by default