45 common multicast configuration, Common multicast configuration, Configuring a multicast mac address entry – H3C Technologies H3C WX3000 Series Unified Switches User Manual

Page 450: Configuring a multicast mac address entry -1

Advertising
background image

45-1

45

Common Multicast Configuration

Common Multicast Configuration

Configuring a Multicast MAC Address Entry

In Layer 2 multicast, the system can add multicast forwarding entries dynamically through a Layer 2
multicast protocol. Alternatively, you can statically bind a port to a multicast MAC address entry by
configuring a multicast MAC address entry manually.

Generally, when receiving a multicast packet for a multicast group not yet registered on the device, the
device will flood the packet within the VLAN to which the port belongs. You can configure a static
multicast MAC address entry to avoid this.

Follow these steps to configure a multicast MAC address entry in system view:

To do…

Use the command…

Remarks

Enter system view

system-view

Create a multicast MAC address
entry

mac-address multicast
mac-address

interface

interface-list vlan

vlan-id

Required
The mac-address argument must be
a multicast MAC address.

Follow these steps to configure a multicast MAC address entry in Ethernet port view:

To do…

Use the command…

Remarks

Enter system view

system

-view

Enter Ethernet port view

interface interface-type
interface-number

Create a multicast MAC address
entry.

mac

-address multicast

mac-address

vlan vlan-id

Required
The mac-address argument must be
a multicast MAC address.

z

If the multicast MAC address entry to be created already exists, the system gives you a prompt.

z

If you want to add a port to a multicast MAC address entry created through the mac-address

multicast

command, you need to remove the entry first, create this entry again, and then add the

specified port to the forwarding ports of this entry.

z

You cannot enable link aggregation on a port on which you have configured a multicast MAC
address, and you cannot configure a multicast MAC address on an aggregation port.

z

You cannot configure a multicast MAC address starting with 01005e in an
IGMP-Snooping-enabled VLAN. You can do that if IGMP Snooping is not enabled in the VLAN.

Advertising