H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 637)

62-7
[SwitchA-GigabitEthernet1/0/1] poe enable
[SwitchA-GigabitEthernet1/0/1] poe max-power 12000
[SwitchA-GigabitEthernet1/0/1] quit
# Enable the PoE feature on GigabitEthernet 1/0/2, and set the PoE maximum output power of
GigabitEthernet 1/0/2 to 2500 mW.
[SwitchA] interface GigabitEthernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] poe enable
[SwitchA-GigabitEthernet1/0/2] poe max-power 2500
[SwitchA-GigabitEthernet1/0/2] quit
# Enable the PoE feature on GigabitEthernet 1/0/8, and set the PoE priority of GigabitEthernet 1/0/8 to
critical.
[SwitchA] interface GigabitEthernet 1/0/8
[SwitchA-GigabitEthernet1/0/8] poe enable
[SwitchA-GigabitEthernet1/0/8] poe priority critical
[SwitchA-GigabitEthernet1/0/8] quit
# Set the PoE management mode on the device to auto (it is the default mode, so this step can be
omitted).
[SwitchA] poe power-management auto
# Enable the PD compatibility detect of the device to allow the device to supply power to part of the
devices noncompliant with the 802.3af standard.
[SwitchA] poe legacy enable