H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 40)

1-3
Resetting the OAP Software System
If the operating system works abnormally or is under other anomalies, you can reset the OAP software
system.
Follow these steps to reset the OAP software system:
To do… Use the command… Remarks
Reset the OAP software system oap reboot slot 0
Required
Available in user view
The reset operation may cause data loss and service interruption. Therefore, before resetting the OAP
software system, you need to save the data on the operating system to avoid service interruption and
hardware data loss.