H3C Technologies H3C WX3000 Series Unified Switches - Manual (Page 59)

1-5
Figure 5-5 Banner page displayed when a user logs in to the switching engine through Web
Click Continue to enter user login authentication page. You will enter the main page of the Web-based
network management system if the authentication succeeds.
Enabling/Disabling the WEB Server
Follow these steps to enable/disable the WEB server:
To do… Use the command… Remarks
Enter system view system-view —
Enable the Web server ip http shutdown
Required
By default, the Web server is enabled.
Disable the Web server undo ip http shutdown Required
To improve security and prevent attack to the unused Sockets, TCP 80 port (which is for HTTP service)
is enabled/disabled after the corresponding configuration.
z
Enabling the Web server (by using the undo ip http shutdown command) opens TCP 80 port.
z
Disabling the Web server (by using the ip http shutdown command) closes TCP 80 port.